Wall mount computer workstation, pc desk


Materials: Ikea: VIKA AMON tabletop (150 x 75cm), EKBY BJÃRNUM bracket, EKBY JÃRPEN shelf (119 x 28cm), MALM nightstand (white), 2 x DIODER multicolor LED-strips. Non-Ikea: HP Touchsmart600 (computer), Vogel's Wallmount, 2 x Aluminium decorative strips (100cm), One ordinary shelf bracket, 2 hinges, Enermax Crystal aluminium keyboard

Description: First I made a frame with 4 slats on the back of the tabletop to move it about an inch from the wall. Then I made a hole in the tabletop for the flatscreen-wallmount. (The tabletop isn't strong enough to hold the screen, so I put the Vogel's wallmount straight on the concrete wall.) After that I put the DIODER LED-strips on the frame behind the tabletop and hung the tabletop on the wall with wooden slats, a bit like this.


I took the EKBY JÃRPEN shelf and sawed a piece out of it to fit over the tabletop. Then I made a little cupboard for the cables from an old MALM nightstand and screwed it to the EKBY shelf. I made a door in the cupboard with 2 hinges and a little shelf inside.

Then I put the shelf on the wall with one EKBY BJARNUM bracket and one ordinary bracket inside the cupboard.

And as a finishing touch I put the aluminium decorative strips between the EKBY shelf and the tabletop.

I hope you'll like the result!

~ FritZz81, Netherlands

Check out this stream